SP-500
Dramatically reduced setup time for material changes
Increased operator safety by reducing contact with the blades
Slit recipes can be stored and accessed in seconds from a PLC or HMI
Class 1 available upon request
Slitter Model SP-500/MSP-A Overview
Combining decades of slitting and engineering knowledge, the SP-500 automatic slitting positioning system provides a highly-accurate, safe and reliable solution for your slitting needs. When multiple materials or line changes are frequent, the SP-500 quickly returns your investment by not requiring an operator to manually reposition each knifeholder with a tape measure, while increasing safety by not requiring an operator near the knife zone.
*Dependent on material and application
SP-500 - Class II
| Minimum Slit Width | 2.00 in50.8 mm |
|---|---|
| Maximum Designated Speed* | 1,676 mpm1,676 mpm |
| Pneumatic Requirement | 80 - 100 psi80 - 100 psi |
| Electrical Requirement | 20 Amps20 Amps |
| Knife Positioning Accuracy | 0.01 in0.2 mm |
| Knifeholder Positioning Speed | 10 knives in approximately 2 minutes10 knives in approximately 2 minutes |
SP-500 - Class III
| Minimum Slit Width | 3.00 in76.2 mm |
|---|---|
| Maximum Designated Speed* | 3,048 mpm3,048 mpm |
| Pneumatic Requirement | 80 - 100 psi80 - 100 psi |
| Electrical Requirement | 20 Amps20 Amps |
| Knife Positioning Accuracy | 0.01 in0.2 mm |
| Knifeholder Positioning Speed | 10 knives in approximately 2 minutes10 knives in approximately 2 minutes |
- Battery
- Cardboard
- Flexible Packaging
- Food and Beverage
- Nonwovens
- Packaging
- Pharmaceutical
- Specialty Converting
- Tag and Label
- Towel and Tissue
Related Products
SE-46C Digital Line Guide Sensor
Detect lines, line edges, graphic patterns and more, where traditional sensors won’t work. Featuring a color touch screen, the image of the web is displayed in full color, for easy and intuitive sensor calibration. The SE-46C is suitable for the most demanding line guiding applications.
Control Series Electronic Knifeholders
Maximize operator safety, productivity and roll quality with Tidland’s Control Series. Features include an LED-backlit touchscreen interface, enhanced durability and available wireless operation.
Performance Series Knifeholder
Achieve faster setups, increased productivity and unrivaled finished roll quality with the Performance Series Knifeholder. Available in three sizes to accommodate a wide range of slitting materials and web speeds in a wide range of applications.
GTS Load Cells
MAGPOWR’s GTS Global Load Cell ensures stability and accuracy, allowing tension to be precisely measured and controlled on a roll.