![Tidland slitter model SP-500_MSP-A_ Tidland slitter model SP-500_MSP-A_](https://www.maxcessintl.com/wp-content/uploads/2021/02/tidland-slitter-model-SP-500_MSP-A_-600x420.jpg)
SP-500
Dramatically reduced setup time for material changes
Increased operator safety by reducing contact with the blades
Slit recipes can be stored and accessed in seconds from a PLC or HMI
Class 1 available upon request
Slitter Model SP-500/MSP-A Overview
Combining decades of slitting and engineering knowledge, the SP-500 automatic slitting positioning system provides a highly-accurate, safe and reliable solution for your slitting needs. When multiple materials or line changes are frequent, the SP-500 quickly returns your investment by not requiring an operator to manually reposition each knifeholder with a tape measure, while increasing safety by not requiring an operator near the knife zone.
*Dependent on material and application
SP-500 - Class II
Minimum Slit Width | 2.00 in50.8 mm |
---|---|
Maximum Designated Speed* | 1,676 mpm1,676 mpm |
Pneumatic Requirement | 80 - 100 psi80 - 100 psi |
Electrical Requirement | 20 Amps20 Amps |
Knife Positioning Accuracy | 0.01 in0.2 mm |
Knifeholder Positioning Speed | 10 knives in approximately 2 minutes10 knives in approximately 2 minutes |
SP-500 - Class III
Minimum Slit Width | 3.00 in76.2 mm |
---|---|
Maximum Designated Speed* | 3,048 mpm3,048 mpm |
Pneumatic Requirement | 80 - 100 psi80 - 100 psi |
Electrical Requirement | 20 Amps20 Amps |
Knife Positioning Accuracy | 0.01 in0.2 mm |
Knifeholder Positioning Speed | 10 knives in approximately 2 minutes10 knives in approximately 2 minutes |
- Tag and Label
- Packaging
- Cardboard
- Food and Beverage
- Flexible Packaging
- Pharmaceutical
- Nonwovens
- Battery
- Towel and Tissue
- Specialty Converting
Related Products
![SE46C digital line guide sensor](https://www.maxcessintl.com/wp-content/uploads/2021/05/fife-SE-46-digital-line-guide-sensor-360x250.jpg)
SE-46C Digital Line Guide Sensor
Detect lines, line edges, graphic patterns and more, where traditional sensors won’t work. Featuring a color touch screen, the image of the web is displayed in full color, for easy and intuitive sensor calibration. The SE-46C is suitable for the most demanding line guiding applications.
![Tidland control series electronic knifeholders](https://www.maxcessintl.com/wp-content/uploads/2021/02/tidland-control-series-electronic-knifeholders-1-360x250.jpg)
Control Series Electronic Knifeholders
Maximize operator safety, productivity and roll quality with Tidland’s Control Series. Features include an LED-backlit touchscreen interface, enhanced durability and available wireless operation.
![Tidland performance series knifeholders 3](https://www.maxcessintl.com/wp-content/uploads/2021/02/tidland-performance-series-knifeholders-3-360x250.jpg)
Performance Series Knifeholder
Achieve faster setups, increased productivity and unrivaled finished roll quality with the Performance Series Knifeholder. Available in three sizes to accommodate a wide range of slitting materials and web speeds in a wide range of applications.
![Magpowr GTS load cells 1](https://www.maxcessintl.com/wp-content/uploads/2021/02/magpowr-GTS-load-cells-1-360x250.jpg)
GTS Load Cells
MAGPOWR’s GTS Global Load Cell ensures stability and accuracy, allowing tension to be precisely measured and controlled on a roll.