DSE-22
- Insensitive to ambient light
- Insensitive to electrostatic discharge
- Temperature stabilized
- Low power consumption
- Can be used for new guiding systems as well as for an upgrade of existing systems
- Fast, easy and robust mounting due to multiple mounting brackets and sensor positioners
- Can be connected to all available Fife web guide processors
- OPTION: Available with Air Sweep connection, to keep the sensor field of view clean in dusty environments
- OPTION: IP65 version
- OPTION: 4” gap available
DSE Digital Infrared Sensors Overview
Because of its compact size and insensitivity to ambient light, the digital infrared sensor DSE - 22 is the ideal solution for many applications where accurate web guiding is required.
The DSE - 22 Infrared Sensor measures the lateral position of the guided material photo electrically. The control range (proportional band) allows significant guide point adjustment. The DSE - 22 is often used in pairs for centre guiding when web width variations are limited. Its excellent technical specifications allow it to also be used with a Fife processor to guide clear film. Normally the DSE - 22 is used for guiding opaque materials.
It is possible to operate the DSE - 22 with either a supply voltage of 12 V or 24 V. The output signal would automatically be switched over in that case. In 12 V supply mode the sensor provides an output signal from 0 to 10 mA and can be connected to all available Fife web guide processors. In 24 V supply mode the sensor supplies an output signal between 4 and 20 mA and can be easily connected to a PLC as well.
The DSE - 22 has a built-in LED display, visible from both sides, and shows directly on the sensor information about the operating status like for instance the existence of the supply voltage, position of the edge of the web inside the field of view or error messages.
Product Sheets
2D/3D Drawings
User Manuals
- Battery
- Cardboard
- Flexible Packaging
- Food and Beverage
- Nonwovens
- Packaging
- Pharmaceutical
- Specialty Converting
- Tag and Label
- Towel and Tissue
Related Products
FIFE-500 Web Guiding System
Leverage the latest in web guiding technology and improve efficiency with the cost-effective FIFE-500, ideal for narrow web and nonwoven applications.
DSE-31
This digital ultrasonic sensor is lightweight, compact, and insensitive to ambient light, using ultrasonic waves to measure the lateral position of the web material.
TS Load Cells
TS load cells provide the most consistent tension control regardless of temperature changes. They’re rugged and highly accurate, measuring tension in any unwind, rewind or intermediate web processing application.
Webex Idler Rolls
We offer more than 400 standard configurations and numerous customizable options available for coating, plating, finish, groove patterns, shaft style, and environmental capabilities.